|
|
If you are interested please send me an email at faapiper@comcast.net . Or you can give my cell a call at 1-570-292-3278. -All Prices are negotiable! -Pictures are in condensed format, to get a larger view just click on it and the picture will come up on a full page. (it will be huge at first, but when it fully loads it will shrink down to viewable size) -If it is crossed out, it is sold! Seagull Bling 3D 50cc RTF Almost new (RTF) Asking-$1200 50cc Bling 3d that is ready to fly minus the reciever and batteries. It had a 7 channel futaba fast receiver in it and if you would like to buy that off me send me an email ( I will also sell the (2) 2000mah 6v nimh). This plane has been flown a total of two times, the engine isn't even broken in yet. If you read around you will find out that the Brillelli 46gt is one of the most reliable engines you will find and is a great performer. Linked below is the build thread for this plane (on my web site), the build thread will tell you all there is to know about this plane and much more. I have also linked the review to this plane. This is local pickup only, will not ship. Please feel free to make an offer. Link to my build thread. http://faapiper.home.comcast.net/~faapiper/new_page_7.htm Review http://www.rcgroups.com/forums/showthread.php?t=604402
Great Planes Realflight G3.5 w/ interlink plus Asking-$160 I got this system about a year ago to practice my 3D manouvers. Now that I am getting out of the hobby I am selling it. It comes with everything it came with when I bought it new from Tower Hobbies. Everything works great and the 3 disks were taken out once to install and once to take this picture so they are new with no scratch, scuffs, or fingerprints. There is also another cord inside the box that I forgot to take out for the picture (I think it's the one for JR radios) This is a great system and you can't go wrong with Great Planes.
Du-Bro Medium Silicone Fuel Tubing 50ft Asking-$25 This is some Medium dubro fuel tubing (50ft spool). Retails for $40. I think a little less than 5ft are used the rest is new and untouched.
JR 4.8v 700mah nicd reciver battery Asking-$10 This battery was in my Hangar 9 Twist for about 2 months untill I upgraded the servos (then I upgraded the battery too). It was new when I bought it. I just cycled it with my Hobbico Accu-Cycle Elite and it got a mah rating of 700mah with good voltage.
Airplane Wheels/Tires Lot of (10) Asking-$ This is (10) random size airplane wheels ranging in size from 2 3/4" up to 3 1/2".
Evolution Engines .46NT 2-stroke glow (RTF) Asking-$50 I bought this engine new. It was in my hangar 9 twist for about two month, it has less than one gallon run through it, it starts and runs great. This engine has been very reliable and powerful for me. It will include the box and owner;s manual.
Asking-$60 This is a lot of 14 servos. They all work as new. New servos (New but opened, never mounted, just tested to make sure they work) (3) Hextronik HX5010 Used servos (all work as new) (4) Futaba S3004 (1) Futaba S3003 (1) Hitec HS-425BB (3) JR NES-537 (1) Dutatrax SX-100 (1) JR DS821 Also Included is a huge lot of servo mount screws, servo horns, grommets, and rubber shock absorbers.
Top Flight Power Point Propeller Balancer Asking-$10 This is a slightly used Top Flight Prop Balancer, I bought it new from Tower Hobbies. Everything works as new. The picture is taken with the box, although since the box doesn't fold up like the balancer it will not be shipped with the box. If you do want me to ship with the box let me know, but it will cost you $4 more to ship. Otherwise the shipping charge listed above is without the box
Covering Tools Iron, Heat Gun, Sealing Iron, and Thermometer Asking- $30 This is all the tools you will need to do a superb covering job. Everything was bought new from Tower Hobbies and used to cover one plane (the trim iron was just plugged in to make sure it worked) I only have to box for the trim iron. Tower Hobbies Covering Iron Coverite Pocket Thermometer Coverite Trim Sealing Iron Tower Hobbies Delux Heat gun This would cost well over $50 to buy this stuff new.
Aquacraft Paradise Sailboat http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMPE4**&P=ML Asking-$65 OBO Description- I bought this new from Tower Hobbies! I have used it about 10 times because the nearest lake is half an hour away. You get everything you see in the picture, everything works like new. The railing around the steering wheel in the back is broken off, it doesn't effect it's performance in any way, just for looks. There is a minor scratch on the left side of the hull from attaching the lines. This is ready to run. Please feel free to ask any questions. Just send me an email if have any questions.
Aviomedelli Tango Asking- 20 OBO Description- 4.5-6.5cc, which i think is around a .40 size. There is very little info on the plane. From the way it looks it is a low wing trainer, semi-symmetrical wings, minor dihedral. There are instructions. It has very sloppy covering on wing and elevator, some of the covering on the wing has been ripped off, so i would plan on recovering. It has a composite fuselage. It has a fair amount of hardware. Price tag says $115. No damage that I know of. If you want more pics or have any questions please just send me an email.
Nitro Evader Silencer Asking- 10 OBO Description- This is the silencer to my nitro evader RC car, it has some scuffs from stones, but other than that is like new. It includes screw to attach to engine and connector.
Nitro Evader Suspension Arm Set Asking- 5 OBO This is a set of 4 very slightly used suspension arms for a duratrax nitro evader st
Duratrax Nitro Evader Transmition and parts Asking- FREE, you pay shipping if you want it shipped!
Included- everything is for the duratrax nitro evader -Duratrax Nitro Evader Transmission with brake (slightly used) Parts- all parts are new and unopened -coverplate screw part #dtxg0513 -differential gear part # dtxc7403 -idler gear and shaft part #dtxc 8080 -e clips 4.0mm part# dtxq052 flat head mach screw 3mm part # dtxq0273
Duratrax Nitro Evader Chassis Asking- 10 OBO This is a Duratrax Nitro Evader Chassis, it was only run no more than 5 times, but it was run on gravel so the bottom has some nicks in it, i also had to grind away some alluminum at the starter hole to fit my starter.
Duratrax 2ch. on channel 62 Asking- 10 OBO This Transmitter came with my Duratrax Nitro Evader, i only used it a couple of times, works great, includes radio antenna and receiver crystal on channel 62
|
